Amina Compact Professional 544E high gain flat panel loudspeaker suitable for installations where the panel loudspeaker is required to be wall mounted, stand mounted or flown. The light weight nature of the product means this actually requires nominal support structures.

For corporate, leisure, retail, theatre, conferencing, external and internal concert, club and exhibition type applications requiring discrete but powerful sound systems, the Amina Compact Professional Panel loudspeakers provide a unique and unobtrusive high quality voice and music reproduction solution. Utilising Amina’s revolutionary technology and unique customisation service these loudspeakers now double as a sound reproduction system and can be painted to match surrounding decoration or have graphics applied to suite corporate requirements.

The Compact Professional panel loudspeakers are mounted very simply using eyebolts for flying, top hats for stand mounting and wall brackets for wall mounting.

When specified, your choice of artwork (from published images to your own artwork provided via a digital file) is professionally applied to the panel surface which is then laminated with a transparent plastic film creating a durable, easy wipe clean surface.

Coverage: One panel will be sufficient to create an even sound level in a room 11m x 11m when mounted at a height of 5m above listening level. Add one additional panel for each additional 120m2 area coverage required. Space the panels evenly across the space to be covered. In surround-sound applications, position the panels accordingly (e.g. front left, front right, front centre, rear left and rear right)

Typical Venues: Internal and external events, Theatres, Halls, Atria, retail malls, bars, public venues.
Product outside dimensions: 456mm x 351mm x 53mm
Active Panel Size: 450mm x 345mm x 5mm
Panel Material: High gain; resin dipped paper honeycomb, polyester skin. 600g/m2
Product Weight: 3Kg Frame: Natural silver anodised aluminium, mitre joined.
Fixings: Eye bolts, top hats, keyhole brackets and off-wall wall bracket options available.
Electrical connection: Professional Speakon or Industrial Spring clip
Impedance: 8 ohms nominal
Sensitivity: 95dB/2.83V/1m (This figure reduces when graphics are mounted onto the panel surface)
Power Handling: [Power ratings assume full bandwidth operation. To avoid excessive mechanical noise a 'brick wall' high pass filter is essential. This will increase the power handling and the subsequent peak sound pressure level]
          Max. Continuous power input = 80W (brick wall high pass filter @ 150Hz)
          Peak programme power input = 160W (brick wall high pass filter @ 150Hz)
          Peak SPL (continuous) > 110dB @ 1m Peak SPL (peak programme) > 113dB @ 1m
          Minimum Filter requirement: Brick Wall, 150Hz.
Placement: For best results, place at least 300mm from a solid structure and do not enclose in any way.
If nearer than this to a solid surface the frequency response will vary, in particular the lower frequency reproduction will be compromised, and the power efficiency will be reduced.
Dispersion angle: Greater than 150 degrees.