Amina Line Array 1015E high gain flat panel loudspeaker suitable for installations where the energy from a sound source is required to be highly directional in the vertical plane in order to reduce reverberant energy from reflective surfaces above and below the immediate listening position. The Amina line array benefits from a very wide (>160 degree) full frequency reproduction in the horizontal plane, allowing extremely effective wide area coverage. The lightweight nature of the product means this actually requires nominal support structures. The panel can be coated to allow it to blend into the background decoration.

For large worship, public concourses and large auditoria type applications requiring discrete but powerful sound systems, the Amina Line Array loudspeakers provide a unique and unobtrusive high quality voice and music reproduction solution. Utilising Amina’s revolutionary technology and unique customisation service these loudspeakers now double as a sound reproduction system and can be painted to match surrounding decoration or have graphics applied to suite corporate requirements.

The Line Array panel loudspeakers are mounted very simply using simple keyhole fixings for wall mounting.

When specified, your choice of artwork (from published images to your own artwork provided via a digital file) is professionally applied to the panel surface, which is then laminated with a transparent plastic film creating a durable, easy wipe clean surface.

Coverage: One panel will be sufficient to create an even sound level in a room 10m x
8m when mounted at an average listening height. Add one additional panel for each
additional 80m2 area coverage required. Space the panels evenly across the space
to be covered.

Typical Venues: Large church and worship areas, cathedrals, large auditoria, airport, railway and exhibition concourses
Product outside dimensions: 1006mm x 156mm x 57mm.
Active Panel Size: 1000mm x 150mm x 3mm
Panel Material: High gain; aluminium honeycomb, grey polyester skin. 680g/m2
Product Weight: 3.9Kg
Frame: Natural silver anodised aluminium, mitred corners.
Fixings: Keyhole fixings that slide in rear channel. Fixing points for Euromet brackets
Electrical connection: Industrial spring clip
Impedance: 8 ohms nominal (100v line transformers optional)
Sensitivity: 88dB/2.83V/1m (When equalised) (This figure reduces when artwork is mounted onto, or paint is added to, the panel surface)
Power Handling: [To avoid excessive mechanical noise and potential damage a 'steep' high pass filter is essential. This will increase the power handling and the subsequent peak sound pressure level]
          Maximum Continuous (RMS) power input = 125W (high pass filter @ 150Hz)
          Minimum Filter requirement: 24dB per Octave, 80Hz.
Placement: Locate centre of panel at listening height or lift and angle as required.
Equalisation: For the very best audio reproduction, equalisation is absolutely necessary to correct the complex frequency response resulting from an acoustically coupled array.