![]() |
Power Output | : | 120 Watts per channel |
Maximum Load | : | 80 Ohm @ 100V |
Power Bandwidth | : | 60Hz - 17kHz (-3 dB) |
Frequency Response | : | 50Hz - 15kHz (+/- 3dB) |
Total Harmonic Distortion | : | 0.5% at 1 kHz (1W - full power) |
Signal To Noise Ratio | : | -80 dB |
Input Sensitivity | : | 0.5 V RMS - 100 Volt line |
Input Connection | : | Active balanced input with male and female 3 pin XLR input/output sockets per channel. |
Input Impedance | : | 10 KOhm |
Outputs | : | 2 x (100V, 70V, 8 Ohm, 4 Ohm) via rear panel barrier strip. Line out to feed additional amplifiers from one of the paralleld XLR input sockets. |
Controls | : | Front panel power switch; recessed rear panel input attenuator (per channel) |
Indicators | : | Power ON & signal present LEDs |
Power Source | : | AC: 230V/ 240 V - 50 Hz; DC: 24 V; 110V - 60Hz (Special) 3 pin IEC connector |
Power Consumption | : | 400 W (maximum) |
Protection | : | Current Limiter protection, plus AC & DC fuses High temperature trip (disconnects load at 120 degrees C) |
Dimensions (HxWxD) mm | : | 88 x 480 x 370 |
Weight | : | 15 Kg |
Rack Mounting | : | Standard |