![]() |
Power Output | : | 250 Watts RMS |
Maximum Load | : | 40 Ohms @ 100V |
Power Bandwidth | : | 60 Hz - 15 kHz < 0.5% THD |
Frequency Response | : | 60 Hz - 15 kHz (+/- 3 dB) |
Total Harmonic Distortion | : | 0.5% at 1 kHz rated power |
Signal To Noise Ratio | : | -80 dB |
Input Sensitivity | : | 700 mV |
Input Connection | : | Active balanced input with male and female 3 pin XLR input/ output sockets per channel. |
Input Impedance | : | 10 KOhm |
Outputs | : | 100 V, 70 V line and 4/ 8 Ohm via rear panel barrier strip. Line out to feed additional amplifiers from one of the paralleled XLR input sockets |
Controls | : | One gain control on rear of the unit via flathead screwdriver control |
Indicators | : | Power ON, Signal Present & Protect LEDs |
Power Source | : | AC: 230V/ 240 V - 50 Hz; DC: 24 V; 110V - 60Hz (Special) 3 pin IEC connector |
Power Consumption | : | 400 W |
Protection | : | Current Limiter protection, plus AC & DC fuses High temperature trip (disconnects load at 120 degrees C) |
Dimensions (HxWxD) mm | : | 88 x 480 x 370 |
Weight | : | 15 Kg |
Rack Mounting | : | Standard |