Amina Picture Frame 434WB high gain flat panel loudspeaker suitable for installations where the panel loudspeaker is required to be wall mounted. The lightweight nature of the product means this actually requires nominal support structures.

For corporate, leisure, heritage, retail, theatre, conferencing and residential locations requiring discrete sound systems, the Amina Picture Frame Panel loudspeakers provide a unique and unobtrusive high quality voice and music reproduction solution. Utilising Amina’s revolutionary technology and unique customisation service these Pictures now double as a sound reproduction system and can be painted to match surrounding decoration or have graphics applied to suite corporate requirements.

The picture frame panel loudspeakers are mounted very simply using rear mounted keyhole brackets. Where a secure fitting is required a 'T' bar headed screw is also supplied with special spanner. This locks the panel in place in an unseen manner. The spanner is required to remove the product.

When specified, your choice of artwork (from published images to your own artwork provided via a digital file) is professionally applied to the panel surface, which is then laminated with a transparent plastic film creating a durable, easy wipe clean surface.

Alternatively the product can be professionally lacquer painted to a specified colour.

Coverage: One panel will be sufficient to create an even sound level in a room 6m x 5m. Add one additional panel for each additional 30m2 area coverage required. In voice reinforcement applications, space the panels evenly across the space to be covered. In surround-sound applications, position the panels accordingly (e.g. front left, front right, front centre, rear left and rear right)

Typical Venues: Churches, Theatres, Halls, Atria, Law Courts, Council Chambers, retail sites, offices etc.
Product outside dimensions: 406mm x 306mm x 40mm
Active Panel Size: 400mm x 300mm x 3mm
Panel Material: Warm sound; resin impregnated glass core, Melamine off white coloured skin. 850g/m2
Product Weight: 2Kg
Frame: Natural silver anodised aluminium, mitre joined.
Fixings: Easy fit keyhole brackets, T bar locking screw and spacers.
Electrical connection: heavy-duty spring clip type.
Impedance: 8 ohms nominal
Sensitivity: 86dB/2.83V/1m (This figure reduces if graphics are mounted onto the panel surface)
Power Handling: [To avoid excessive mechanical noise and possible damage to the speaker a high pass filter (HPF) is essential. This will increase the power handling and the possible maximum peak sound pressure level]
          Maximum Continuous power input = 40W (HPF at 80Hz, 24dB/octave)
          Maximum Continuous SPL > 102dB @ 1m (HPF at 80Hz, 24dB/octave)
          Minimum Filter requirement: Amina AF2 high pass filter
          80Hz @ 24dB per octave.
Placement: For best results, place directly against a flat solid structure using the fixing options provided.
Dispersion angle: Greater than 150 degrees.
Fixings:
The APF434WB is supplied with 3 fixing options:
1) Keyhole (x4) – provides a visible fixing to walls or ceilings.
2) Saw-tooth hanger (x2) – a simple method for hanging the speaker to a wall
3) Security “T-screw” (please specify) – using the spanner the “T-screw” provides a hidden, locking fixing method to walls.