The CM812 is an 8-input, 2-output mixer with remote control of volume and on/off switching for each input. It also provides 3 preset settings and bass and treble control for each input.

Control your sound system from anywhere in the building!
• Ideal for use within churches, schools and colleges
• Gives you freedom to do your job without having to be a sound engineer

Main Control Unit
• Industry standard 19” 1U painted metal casework
• Remote to main connection by VHF wireless transmission (up to 100m line of sight transmission)
• 8 input channels : inputs can be mic/line or CD level
• 2 output channels
• Each input can be assigned to either or both output channels
• Balanced mic inputs connected via 2-part terminal block
• Phantom power available on mic inputs
• Line and CD inputs connected via twin phono sockets
• Separate sensitivity preset per line input channel to enable balancing of different input levels

Remote Control Unit
• Uncomplicated, easy to use control panel
• Separate illuminated ON/OFF switches and level controls for each channel
• 2-band EQ on each input channel (adjustable from remote control unit)
• 3 Preset complete configurations which can be set or recalled from the remote control unit
• Remote control unit batteries can power unit for minimum of 15 hours between charges.
• Recharge time less than 8 hours

• Inputs , Mic : 3.5mV balanced into 600 ohms (2-part terminal block)
              Line : 1V unbalanced into 10K ohms (stereo phono) CD/High level line
                       275mV unbalanced into 10K ohms (stereo phono) Low level line
• Outputs : 775mV , 560 ohm unbalanced (1/4” stereo jack)
• Noise : Mic inputs -60.5dB (10 – 100k Hz) , Line inputs -76.0dB (10 – 100k Hz)
• Power : 240v ac 50/60 Hz 15VA max using IEC connector
• Remote power : 3 x C type rechargeable
• Mechanical : Main unit , 1U 19” rack casing 170mm deep