![]() |
![]() |
The Di8 DCt model option is equipped with an internally mounted 60W low insertion loss line transformer, with easily accessible rotary tapping switch, for 70V or 100V distributed sound applications.
70V systems: 60W / 30W / 15W / 7.5W / OFF & Low Impedance operation
100V systems: 60W / 30W / 15W / OFF & Low Impedance operation
| Frequency Response (-3dB) (1) | 65Hz - 30kHz |
| Frequency Range (-10dB) (1) | 53Hz - 35kHz |
| System Sensitivity (1W @1m) (2) | 91dB (1W = 2.83V for 8 Ohms) |
| Nominal Coverage Angle | 90 degrees conical |
| Driver Complement | Dual Concentric™ constant directivity driver Low Frequency: 200mm (8.00") with resin treated multi fibre paper pulp cone |
| Crossover | 1.5kHz - 2nd order LF, 2nd order HF (with dynamic HF protection) |
| Directivity Factor (Q) | 5.5 averaged 1kHz to 10kHz |
| Directivity Index (DI) | 7 averaged 1kHz to 10kHz |
| Rated Maximum SPL | Average: 111dB Peak: 117dB |
| Power Handling (3) | Average: 90W Programme: 180W Peak: 360W |
| Recommended Amplifier Power | 180W @ 8 Ohms |
| Nominal Impedance | 8 Ohms |
| Di8 DCt only - Transformer Taps (top rotary switch) | 70V: 60W / 30W / 15W / 7.5W / OFF & Low Impedance operation 100V: 60W / 30W / 15W / OFF & Low Impedance operation |
| CONSTRUCTION | |
| Enclosure | High Impact Polystyrene (HIPS) rated IP64 to EN60529 (IEC529) |
| Grille | Steel, with weather resistant coating |
| Finish | Textured black or white paint (custom trim colours can be supplied pre-fitted to special order - minimum order quantity applies) |
| Connectors | Euroblock type removable locking connector with screw terminals with "loop through" facility |
| Fittings | 1 x K-Ball™ Bracket socket 2 x M8 yoke bracket inserts |
| Supplied Accessories | Yoke bracket |
| Optional Accessories | Pole mount adaptor K-Ball™ pre-wired multi angle bracket |
| Dimensions | 404.3 x 260 x 260.3mm (15.92 x 10.24 x 10.25”) |
| NET Weight | 7.0kg (15.87lbs) |