NAVIGATION
- We are proud to announce that R W Salt Communications has recently been made the sole UK distributor within the Pro-Audio and installation market for the Fender Passport range of Portable sound products.\r\nThe… Read more…
Posted: Thu 1st Jan 2009
Install Mixers
Australian Monitor
-
ORDER CODE: MX61
Replacing the long running TX6000, the new Australian Monitor MX61 (6 channel) mixer offers both improved audio and noise specs plus even more features.
Key improvements include an all new whisper quiet pre-amp section, the ability to switch all the XLR's from mic to balanced line level,… More
-
ORDER CODE: MX81
Replacing the long running TX8000, the new Australian Monitor MX81 (8 channel) mixer offers both improved audio and noise specs plus even more features.
Key improvements include an all new whisper quiet pre-amp section, the ability to switch all the XLR's from mic to balanced line level,… More
-
ORDER CODE: MX82
This product replaces the TX8202.
The MX82 is a brand new 8 channel stereo mixer from Australian Monitor. It offers high quality audio performance and a wide array of features in a standard 1RU size.
There are four mic/line inputs and four stereo… More
FBT
-
ORDER CODE: M12X4
• 4 Microphone/Line inputs (switchable)
• 4 Aux/Music inputs (only one selectable for use at a time)
• Priority microphone 1 over all inputs, 4 microphone inputs over Aux/Music inputs
• Microphone inputs… More
Interm
-
• 6 Microphone/line inputs
• 4 Aux/Music inputs (selectable for each output zone)
• Microphone inputs have block switched Phantom Power (24V)
• 4 Separate output volume controls
• Record outputs
• Connection points for 2 x MBT 8004 4 zone paging consoles
•… More
-
The PP-9213 is a versatile, high-performance
mixer/pre-amplifier for application as a standalone
mixer, or an add on to an existing PA system.
Features include nine mono mic/line inputs, single
fader controlled output, record out, and LED output
… More
-
The PP-9214 is a versatile, high-performance
mixer/pre-amplifier for application as a standalone
mixer, or an add-on to an existing PA system.
Features include eight mono inputs (one mic,
seven mic/line) fader controlled output, record out,
… More
Phonic
-
ORDER CODE: PM801
The Phonic PM 801 is an 8-channel Mic/Line mixer with individual phantom power, tone control, clip indicator and mute control on each channel. The ultra low noise pre-amps offer an incredible 62 dB of gain for Mic inputs. A pre-fader output and AUX input give you maximum flexibility to use this mixer… More
RCF
-
PR 4092 has been designed to provide a flexible solution for any paging and music application in PA systems.
Each of the 9 inputs can be sent to output A only, output B only, or both A+B; in this way PR 4092 can also be used as a doublepreamplifier: "A-bus" dedicated to paging,… More
TOA
-
Ambient Noise Controller Module
The AN-001T is a plug-in module of 2-channel ambient noise detector designed for use with the M-9000.
It automatically adjusts the output volume in response to the change of ambient noise level. The AN-001T can handle… More
-
Ambient Noise Sensing Microphone for M-9000
The AN-9001 is an electret condenser microphone designed for ambient
noise sensing. It is used in conjunction with the AN-001T Ambient Noise control module in the M-9000.… More
-
ORDER CODE: C001T
Input/Output Control Module
The C-001T is Control I/O expansion module designed for use with the M-9000 and can provide up to 8 channels each of input and output expansion. Since the main unit has 4 preinstalled inputs and outputs each, the control input and output… More
-
Dual Mic/Line Input Module with DSP
The D-001T is a plug-in module designed for use with the M-9000 and can provide two independent balanced inputs. The D-001T can handle signals ranging from microphone level to line level by controlling their input… More
-
ORDER CODE: D901
The new TOA D-901 Digital Mixer is a fully modular, cost-effective digital mixer featuring a 12-input, 8-bus, 8-output channel configuration (12 x 8 matrix) with easy operation that can be expanded as applications require.
More
-
ORDER CODE: D911
D-911 VCA FADER UNIT
A dedicated VCA fader unit that significantly expands the operational scope of the D-901 Digital Mixer. It adds useful control capabilities when connected to the D-984VC. In such a connection setup, full VCA operation… More
-
ORDER CODE: D921E
D-921E 2-channel input module
The D-921E is a 2-channel input module that accepts mic and line level inputs (selectable).
It is equipped with removable terminal block connectors, adjustable input sensitivity… More
-
ORDER CODE: D921F
D-921F 2-channel input module
The D-921F is a 2-channel input module that accepts mic and line level inputs (selectable).
It is equipped with XLR connectors, adjustable input sensitivity as well… More
-
ORDER CODE: D922E
D-922E 2-channel input module
The D-922E is a 2-channel input module that accepts mic and line level inputs (selectable).
It is equipped… More
-
ORDER CODE: D922F
D-922F 2-channel input module
The D-922F is a 2-channel input module that accepts mic and line level inputs (selectable).
It is equipped with XLR connectors… More
-
D-923AE Digital Input Modules. Applicable AES/EBU
2-Channel digital input module. With the use of this module, digital signals can be input, permitting direct connection of the D-901… More
-
ORDER CODE: D936R
D-936R 4 stereo input module
The D-936R is a 4 stereo input module can be used to send one or a L+R mix of all the 4 stereo inputs to the D-901. Stereo/mono… More
-
Digital Input Modules. Applicable S/PDIF Format
Single channel stereo digital input module. With the use of this module, digital signals can be input, permitting direct connection of the D-901 to equipment having a digital output. Owing to the built-in sample rate… More
-
D-961SP Digital Output Modules. Applicable S / PD
2-Channel stereo digital output module. With the use of this module, digital signals can be output, permitting direct connection of the D-901 to equipment having a digital output More
-
ORDER CODE: D971E
D-971E 4-channel line output module
The D-971E has 4-channel line outputs with removable terminal block connectors. More
-
ORDER CODE: D971M
D-971M 4-channel line output module
The D-971M has 4-channel line outputs with XLR connectors. More
-
ORDER CODE: D971R
D-971R 4-channel line output module
The D-971R has 4-channel line outputs with standard RCA pin jack. More
-
ORDER CODE: D981
D-981 external remote control
The D-981 allows external remote control of memory presets, volume control, stereo input selection and channel ON/OFF operation. More
-
ORDER CODE: D983
D-983 Remote Control Module
24 inputs 16 outputs
For external remote control of memory presets, gain control, stereo input selection and channel ON/OFF operation plus tally outputs. More
-
D-984 Remote VCA Control Module
VCA control (20 channels) + 8 inputs 8 outputs
By the VCA controls from external equipment,this module permits the D-901's gains of 12 inputs and 8 outputs to be controlled. By the contact… More
-
Digital Quad Amplifier
The new DA Series digital multi-channel amplifiers are the latest addition to the TOA line of industry-standard audio products for installed sound. The DA Series is ideal for multi-zone distributed… More
-
ORDER CODE: M9000
The TOA M-9000 Series Digital Matrix Mixer features a compact design that fits in a two rack space package. The versatile new Mixer is ideal for multi-zone paging, music distribution and room-combining applications.
The M-9000 includes eight module ports allowing designers to easily… More
-
Speaker Selector
The SS-9001 is a speaker selector used with the ZP-001T zone paging module. It outputs 2 input signals to 4 different zones. More
-
Dual Line Output Expansion Module with DSP
The T-001T is a plug-in module designed for use with the M-9000 and provide two independent balanced outputs. It can drive load of 600Ω up to +16dB. It can process effect for TONE/EQ/ COMPRESSOR to two inputs… More
-
Remote Panel
The ZM-9002 is a remote control switch/volume panel used with the M-9000. It adds 4 amplifier control inputs and 1 remote volume control, and can be mounted in an American Standard 1-gang electrical box in
the wall. More
-
Remote Panel
The ZM-9002 is a remote control switch/volume panel used with the M-9000. It adds 4 amplifier control inputs and 1 remote volume control, and can be mounted in an American Standard 1-gang electrical box in the wall. More
-
Telephone Zone Paging Module
The ZP-001T is a zone paging module designed for use with the M-9000
and functions as interface to connect the M-9000 to an analog PABX,
allowing zone paging to be initiated from the PABX. There are two… More
