NAVIGATION
- We are proud to announce that R W Salt Communications has recently been made the sole UK distributor within the Pro-Audio and installation market for the Fender Passport range of Portable sound products.\r\nThe… Read more…
Posted: Thu 1st Jan 2009
Modular Audio Systems
RCF
-
2U Kit for Mounting AM4000 Series Amplifiers More
-
Set of 10 Front & Rear Closure Panels for MF 6000 Mainframe. More
-
FLEXA 10 Slot Mainframe:
The ‘FLEXA’ system is a new innovative Modular PA system
which will gradually evolve into a complete electronics
series to comply with IEC 60849 Voice Alarm Applications.
Furthermore the true flexibility… More
-
MP6003 is a 3 channels modular mixer to use in the RCF FLEXA system. Maximum useable 9 modules for 27 total inputs. More
-
-
-
-
-
-
240W RMS (2 FLEXA slot). More
-
TOA
-
360W RMS output power.
Frequency response of 40 ~ 16,000Hz ± 3dB (at 1 / 3 rated output).
One PROGRAM and one PRIORITY input, with cascade input on each for parallel connection via optional 5-pin DIN connector.
Versatile AC mains or 24V DC operation.
… More
-
Desktop cabinet with mounting space for 10 modules.
Front access to module sockets.
Card connectors and main buses for plug in modules eliminate complicated wiring.
Usable as a frame for a multi-channel preamplifier.
Two V-1001B panels are provided… More
-
V-1001B Blank Panel, Single Width More
-
V-1002B Blank Panel, Double Width More
-
Siren, yelp and buzzer signals available.
Red signal LED and green paging ready LED.
Semi-fixed output level control and sounding time. More
-
Siren, yelp and buzzer signals available.
Red signal LED and green paging ready LED.
Semi-fixed output level control and sounding time. More
-
Switchable 2-tone chime or single gong tone.
Red signal LED and Green paging ready LED. More
-
Compressor (switchable) is provided with Mic level input.
Various applications possible, depending on the selection of programming functions and the insertion location in the mixer frame or mixer power amplifiers.
Electrically balanced input. More
-
Semi-fixed volume control for adjusting the output level during normal and priority muting operations.
Electrically balanced output More
-
4 selector buttons and 1 reset button for easy handling.
Program selectable from 4 inputs.
Balanced and unbalanced outputs provided.
Muting function available on unbalanced output line. More
-
2-in / 5-out zone selector remotely controlled from a microphone.
An override function for emergency paging.
Green and red LEDs indicate the zone selection status. More
-
By changing jumper connections, functions such as standby amp switchover, program or broadcast zone selection and mic precedence are possible.
44-pin card edge connector for up to 6 inputs and 5 outputs.
Operation monitoring by 5 dual colour LEDs and 1 red LED. More
-
Data Receiver Module for use with VR-1010 and VR-1020 remote microphones.
Max. 20 outpu controls plus all call.
In-use / malfunction remote microphone lamp and unit error lamp.
Chime volume control and chime activation switch for internal chime OFF / ON.
… More
-
Combines preamp signals with no mixing loss.
Bass and treble tone controls.
LED output level indication.
Slide volume control. More
-
Combines preamp signals with no mixing loss.
Bass and treble tone controls.
LED output level indication.
Semi-fixed volume control. More
-
Plug-in connection with the V-1000B mixer frame.
Supplies 24V DC power to modules in the V-1000B.
Protection circuitry for preventing shot circuits. More
-
Transformer isolated low impedance input.
Phantom power (switchable).
Various applications possible depending on the selection of programming functions and the insertion location in the mixer frame or mixer power More
-
Transformer isolated balanced line input.
Unbalanced line output.
Front panel handle for easy removal. More
-
240W RMS output power.
Wide 40 ~ 16,000Hz frequency range.
2 program and 2 priority inputs with program input muting during priority operation.
Operates on both AC mains and 24V DC.
Rack-mountable with optional TOA mounting accessories (VP-1060B / VP-1120B: 1 / 2 3-unit size / VP-1240B: 3-unit… More
-
Designed for V-1000 Series microphone pre-amps and chime modules.
Press to talk switch.
Chime and speech lamps provided.
Two 5-pin DIN plugs for connection to microphone amps and chime modules. More
-
Unidirectional Microphone.
Announcement to each or to all of 5 zones.
Built in compressor circuit and level indicator prevent input distortion.
Preselected or "first on" priorities can be established among multiple microphone units.
AUX… More
-
Unidirectional Microphone.
Announcement to each or to all of 10 zones.
Built in compressor circuit and level indicator prevent input distortion.
Preselected or "first on" priorities can be established among multiple microphone units.
AUX… More
-
Unidirectional Microphone.
Announcement to each or to all of 20 zones.
Built in compressor circuit and level indicator prevent input distortion.
Preselected or "first on" priorities can be established among multiple microphone units.
AUX… More
-
The YA-1000A module is designed for use with VP Series power amplifiers and VM Series mixer power amplifiers. It detects breakages in the speaker-amplifier line loop by means of a 20kHz pilot signal. If there is any breakage, the amplifier POWER LED indicator goes out, activating the unit's relay… More
