![]() |
You want the rich, luscious sound that’s defined studio reverb for three decades: a genuine Lexicon hardware processor. But you also want the flexibility of programming high-quality effects right inside your DAW program…without bogging down your CPU or resorting to expensive processing cards.
Have it all with the MX400. All parameters of every reverb, delay and dynamic effect in this powerhouse quad processor are available inside any VST® or AU compatible DAW program. Just link your computer to the MX400 with a USB cable and control all automation and recall parameters exactly as you would with any software plug-in — while enjoying the sonic benefits only Lexicon hardware can provide.
| Analog Audio Inputs | |
| Connectors | (4) 1/4" TRS balanced or unbalanced |
| Impedance | 50k Ohms bal., 25k Ohms unbal. |
| Input Level | +4 dBu nominal, +24 dBu maxium 48kHz or 44.1kHz |
| A/D Conversion | 24-bit, 48kHz 128 x oversampling |
| Analog Audio Outputs | |
| Frequency Response | 10Hz - 20kHz +0 dB/-0.5 dB |
| THD+N | <0.0019% 10Hz - 20kHz |
| Dynamic Range | >109dB (A-weighted) A/A |
| Crosstalk | typical <-80 dB 20Hz - 20kHz |
| Digital Input and Output | |
| Connectors | Dual RCA phono (S/PDIF) |
| Format | S/PDIF 24-bit |
| Sample Rate | 44.1 or 48kHz |
| Frequency Response | 10Hz to 22kHz ±0.5 dB @ 48kHz |
| Control Interface | |
| USB | USB 1.0 for MX-EDITª Editor/Librarian and VSTª/Audio Units plug-ins |
| MIDI | In/Out 5-pin DIN |
| Foot Pedal | 1/4" phone jack |
| General | |
| Power | 117 VAC or 230 VAC, 18 Watts |
| Size (W/H/D) | 19" x 1.75" x 7.25"*/6.375" |
| Weight | 5.8 lbs. (2.6 kg) |