![]() |
The TS 900 M pocket transmitter with metal housing has been designed for multifunctional applications like for theatre applications with a clip-on microphone, on stage as guitar transmitter or for broadcast applications. With its integrated clip it can be attached to belts, waist-bands or guitar straps.
Using the ACT infra red interface the selected frequency can be transmitted from the receiver to the transmitter. The LC-Display clearly indicates the selected channel/group and the battery status (5-stage). The 4-pin mini XLR input connector is utilized for the connection of microphones or instruments. For a great number of microphones and instruments the signals can be matched to an optimum level by using the gain control. With the MT-/GT-switch it is possible to select between microphones and instruments. In the GT-mode (GT for guitar) the gain control is inactive, in the MT-mode it is active.
Due to the pilot tone system there is no mute-switch needed, because the receiver is muted automatically when the transmitter is switched off. The operating time with two 1.5 V AA batteries is around 20 hours.
Rugged metal housing (magnesium alloy)
ACT infrared interface for automatic frequency setting
4-pin mini-XLR input connector for connection of microphones and instruments
Gain control for input level adjustment
Silent On/Off switch
Clear LC display indicating group/channel and battery status (5-stage)
Operating time
Operating time > 20 hours with 2 x 1,5 V AA batteries
Incl. batteries and transport bag
| Frequency range | 668-692MHz, 774-798 MHz, 790-814 MHz, 841-865 MHz |
| Modulation | FM |
| Nominal deviation | ± 40 kHz |
| Radiated transmitter power | > 20 mW |
| Compander system | NE 572 |
| Transmission range | > 100 m |
| Signal-to-noise ratio | > 110 dB |
| T.H.D. | < 0.5% bei 1 kHz |
| Frequency resposne | 50 Hz - 18,000 Hz |
| Gain | 10 mV - 0.3 V adjustable, at nominal deviation |
| Power supply | 2 x 1.5 V batteries (AA) or rechargeable batteries |
| Current consumption | Approx. 85 mA |
| Operating time | > 20 hours with alkaline batteries |
| 4-pin connection | Pin 1= Ground, Pin 2= IN1, Pin 3= IN2, Pin 4=+5V |
| Dimensions | (L x W x D) 110 x 65.5 x 24.5 mm |
| Weight | 156 g |