The TS12 uses a substantially built 300mm (12.00”) down-firing drive unit, with an oversized magnet system, in an exceptionally sturdy and rigid cabinet ensuring extraordinary control of the drive unit and minimising unwanted cabinet resonance.

The massive roll surround that terminates the cone to the rigid driver chassis allows substantial cone excursion providing the necessary air movement to ensure very extended low frequency output.

Achieving the optimum settings for music or home cinema listening is easy. Low frequency extension can be varied from around 60Hz down to the unit’s lowest operating frequency via a control on the rear panel of the sub. This allows the subwoofer to be adjusted to match the relative level of the main speakers or just simply set to personal listening taste. Movies will have that floor shaking real home cinema power, and music will come alive with that bass dynamic you perhaps didn’t even realise was there.

The TS12 is capable of spectacular low end impact with the ability to remain agile enough to keep finer low frequency detail and massive, explosive effects under complete control. With sufficient power and authority to deliver impressive result in a larger home theatre system. 

Peak output power	500Watts RMS
Low frequency response	26Hz
Limit for usable output	15Hz
Inputs	2 x line level phono, 2 x XLR balanced
Outputs	2 x XLR balanced (direct or 80Hz HIPASS)
Input filter	2nd order low pass, 50Hz - 150Hz, -6dB
Auto mute	After approximately 12 minutes in absence of input signal
DRIVE UNITS
Driver type	300mm (12.00")
CONSTRUCTION
Enclosure type	Closed box
Volume	22 litre / 0.78cu.ft
Dimensions	372 x 335 x 335 mm (14.75 x 13.10 x 13.10")
Additional features	Phase control, crossover, defeat switch for LFE operation, soft limiting to avoid overload, LF extension control
Mains voltage	120V nominal AC~, 60Hz, 230 nominal AC~, 50Hz
Mains fuse	120V -T5.0AL/ 250V, 230V- T2.5AL/ 250V
Maximum Power Consumption	600VA
Weight	12.5kg / 27.5lbs
Finish	Black