![]() |
![]() |
The TS8 uses a substantially built 200mm (8.00”) down-firing drive unit, with an oversized magnet system, in an exceptionally sturdy and rigid cabinet ensuring extraordinary control of the drive unit and minimising unwanted cabinet resonance. The massive roll surround that terminates the cone to the rigid driver chassis allows substantial cone excursion providing the necessary air movement to ensure very extended low frequency output.
Achieving the optimum settings for music or home cinema listening is easy. Low frequency extension can be varied from around 60Hz down to the unit’s lowest operating frequency via a control on the rear panel of the sub. This allows the subwoofer to be adjusted to match the relative level of the main speakers or just simply set to personal listening taste. Movies will have that floor shaking real home cinema power, and music will come alive with that bass dynamic you perhaps didn’t even realise was there.
Occupying less than a cubic foot of space including the attractive cone-shaped spiked feet, the TS8 is unobtrusive even in a very small room.
| Peak output power | 200Watts RMS |
| Low frequency response | 32Hz |
| Inputs | 2 x line level phono, 2 x XLR balanced |
| Input filter | 2nd order low pass, 50Hz - 150Hz, -6dB |
| Auto mute | After apporximately 12 minutes in absence of input signal |
| DRIVE UNITS | |
| Driver type | 200mm (8.00") |
| CONSTRUCTION | |
| Enclosure type | Closed Box |
| Volume | 12.5 litre / 0.45cu.ft |
| Dimensions | 292 x 280 x 255mm (11.50 x 11.50 x 10.00") |
| Additional features | Phase control, crossover defeat switch for LFE operation, soft limiting to avoid overload, LF extension control |
| Mains voltage | 120V nominal AC~, 60Hz, 230V nominal AC~, 50Hz |
| Mains fuse | 120V - T2AL / 250V, 230V nominal AC~, 50Hz |
| Weight | 7.0kg / 15.4lbs |
| Finish | Black |