![]() |
![]() |
The Yamaha XP series offers five power amplifier models that deliver unmatched quality and value for installations. These power amplifier feature high power, outstanding sound quality, extended reliability, and superior stability for a wide range of installed sound systems as well as portable live sound applications.
| Model | XP7000 | |||||
|---|---|---|---|---|---|---|
| Output power 1kHz THD+N=1% | 8ohms | 750Wx2 | ||||
| 4ohms | 1100Wx2 | |||||
| 8ohms/BRIDGE | 2200W | |||||
| Output power 20Hz-20kHz THD+N=0.1% | 8ohms | 690Wx2 | ||||
| 4ohms | 950Wx2 | |||||
| 8ohms/BRIDGE | 1900W | |||||
| 70V, RL=8ohms | 625Wx2 | |||||
| 100V/BRIDGE, RL=16ohms | - | |||||
| Output power 1kHz 20ms, nonclip | 2ohms | 1600Wx2 | ||||
| 4ohms/bridge | 3200W | |||||
| Common specifications | ||||||
| S/N ratio 20Hz-20kHz | 104dB | |||||
| Idle power consumption | 35W | |||||
| Power consumption | 650W | |||||
| Power Bandwidth (half power THD+N=0.5%) | 10Hz-40kHz | |||||
| Total harmonic distortion 20Hz-20kHz, half power | 0.1% | |||||
| Intermodulation distortion 60Hz: 7kHz, 4:1, half power | 0.1% | |||||
| Frequency response RL=8ohms, Po=1W,HPF=OFF | 0, +0, -1dB | |||||
| Channel separation Half power RL=8ohms 1kHz ATT. Max input 600ohms shunt | 70dB | |||||
| Residual noise 20Hz-20kHz (DIN AUDIO) | -70dBu | |||||
| Damping factor 8ohms, f=1kHz | 300 | |||||
| Maximum voltage gain | 32dB/26dB/+4dBu (GAIN SELECT SW) | |||||
| Input Sensitivity ATT. max Rated Power 8ohms | Switch Position: +4dBu | +4dBu | ||||
| Switch Position: 26B | +13.7dBu | |||||
| Switch Position: 32dB | +7.7dBu | |||||
| Maximum input voltage | +22dBu | |||||
| Actual load impedance | 20kohms (balanced), 10kohms (unbalanced) | |||||
| Control | Front panel | POWER switch(push on/push off), attenuator (31position) x 2 | ||||
| Rear panel | MODE switch (STEREO/BRIDGE/PARALLEL) x 1, HPF switch (20Hz/55Hz/OFF 12dB/oct) x 2, GAIN SELECT switch (32dB/26dB/+4dBu) x 1 | |||||
| Connector | Input | XLR-3-31 type/ch, Euroblock connector (balanced)/ch | ||||
| Output | SPEAKON/ch, 5way binding post x 1 | |||||
| MONITOR/REMOTE | Dsub15P x 1 | |||||
| Indicators | POWER/STANDBY x 1 (Green/Orange), SIGNAL x 2 (Green), CLIP/LIMIT x 2 (Red), PROTECTION x 1 (Red), TEMP x 1 (Red) heatsink temp ≥ 85 degrees celsius | |||||
| Load protection | POWER switch on/off mute, DC-fault: power supply shutdown/return automatically | |||||
| Amplifier protection | Thermal (Heatsink temp ≥ 90C°): Mute the output and do not return automatically. VI limitter (RL≤ 1ohms) : Limit the output | |||||
| Power supply protection | Thermal (Heatsink temp ≥ 100C°), Power supply shutdown, (transfomer temp ≥ 130 degrees celsius) return automatically | |||||
| Cooling | Variable-speed fan: x 1 (Fan stop at heatsink temp ≤ 55 degrees celsius) | |||||
| Dimensions(W x H x D) | 480 x 88 x 456 mm | |||||
| Weight | 14kg | |||||